Chris tormey bitcoin news

Navy, Retired Admiral Chris tormey bitcoin news Winnefeld, Jr. Co-Chair, Stop the Addiction Fatality Epidemic Project U.

Let me just reiterate that for most people, Linux is likely the better choice. 50 harddrive, and you save yourself the cost of a Windows license as well. So with that in mind, if Windows sounds like it’s the right choice for you, read on for our setup guide! Build a Litecoin Mining Rig, part 3:  Windows Setup I’m not going to go into quite as much detail as I did with our Linux setup guide, as most of you are probably already quite comfortable with basic Windows tasks. The steps outlined below should be adequate for the average Windows user, but feel free to leave comments if anything is unclear or missing. Step 1: Configure BIOS Settings Before we even get to Windows, make sure your mining computer’s BIOS settings are in order.

You should end up in the BIOS configuration area. Change power options so that the computer automatically turns itself on whenever power is restored. The reason for this is two-fold: first, it’ll make sure that your miner automatically starts up after a power outage. Second, it makes powering the computer on much easier if you don’t happen to have a power switch connected to the motherboard. Disable all components that you don’t plan to use. For me, that meant disabling onboard audio, the USB 3.

Firewire port, and the serial port. Windows 8 should work as well, although I have not tested it myself. I’m going to assume that everyone reading this is capable of installing a fresh copy of Windows 7. Complete the installation and boot into the Windows desktop before proceeding to the next step. Ethernet driver that came with your motherboard so that you can get online.

Step 3: Install Windows security updates While this step isn’t strictly necessary in order to get you mining, it is strongly recommended. Repeat the above two steps until there are no more updates to install. Depending on how old your Windows installation media is, this process could take quite awhile. Step 4: Configure automatic login We want our mining rigs to boot up and start mining without any intervention on our part. We’ll need to enable auto-login for that to happen. You’ll be prompted to enter your password to confirm the change.

Step 5: Change power settings to prevent sleep By default, Windows will go to sleep after 30 minutes without user interaction. Obviously, we don’t want that behavior on our mining rigs. If you’re using another GPU, you’ll need to go to the AMD site and get appropriate drivers. When the download is complete, install the display drivers. You’ll need to reboot to complete the installation. When the download is complete, install the SDK.

Important: you may need to have something plugged into each GPU to prevent the OS from idling it. You can plug 3 monitors into your 3 GPUs, but that isn’t very practical. The easiest option is to create 3 dummy plugs, and leave them attached to your GPUs. OS into believing that a monitor is attached, which will prevent the hardware from being idled. Step 7: Install cgminer Cgminer is the mining software we’ll be using. Enter the following text into your mine_litecoins.